描述
Volarmachine GT Series: Precision Rebar Straightening and Cutting Machines
Ensure the structural integrity of your construction projects with Volarmachine’s high-performance rebar processing solutions. Our GT series (GT6-14, GT4-12, and GT6-12) is engineered for maximum precision, high-speed traction, and long-term durability in demanding environments.
Why Choose Volarmachine for Steel Bar Processing?
At Volarmachine, we combine advanced orthodontic technology with robust mechanical engineering. Our machines deliver a straightening degree of ±2毫米/米 and a cutting length error of just ±10毫米, ensuring every steel bar meets international building standards.
Core Technology: The 8-Wheel Orthodontic System
The heart of a Volarmachine lies in its optimized alignment mechanism:
-
Dual-Drive System: Features four central alignment wheels and four high-traction running wheels.
-
Stress Relief: Our system mimics a gentle, controlled arc to neutralize internal tension without compromising the rebar’s tensile strength.
-
High-Speed Efficiency: Reach traction speeds up to 52米/分钟 (GT6-14 model) for high-volume production.
Technical Specifications: Compare Our Models
| 模型 | GT6-14 | GT4-12 | GT6-12 |
|---|---|---|---|
| 矫直直径范围 | Ф6-Ф14毫米 | Ф4-Ф12毫米 | Ф4-Ф12毫米 |
| 牵引速度 | 52米/分钟 | 48米/分钟 | 45米/分钟 |
| 矫直度 | ±2毫米/米 | ±2毫米/米 | ±2毫米/米 |
| 牵引电机功率 | 11KW-4匹 | 7.5KW-4极 | 9KW-4匹 |
| 油泵电机功率 | 5.5KW-4匹 | 4KW-4功率 | 5.5KW-4匹 |
| 固定线长 | 500-9000mm（可延长） | 800-9000mm（可延长） | 300-9999mm（可延长） |
| 线切割长度误差 | ±10毫米 | ±10毫米 | ±10毫米 |
| 重量 | 1100公斤 | 850公斤 | 450公斤 |
| 方面 | 2900毫米×800毫米×1100毫米 | 2200毫米×730毫米×1150毫米 | 1730毫米×900毫米×850毫米 |
Operational Guide & Best Practices
1. Orthodontic Block Calibration
这 Volarmachine orthodontic cylinder uses five specialized blocks. Align the 1st and 5th blocks on the centerline, then offset the middle three by ~3mm. Adjust incrementally until the rebar is perfectly straight.
2. Safety First
-
Guide Installation: Always use a 1-meter guide pipe at the entrance to prevent "whiplash."
-
Protective Covers: Ensure all covers are locked before operation to prevent block dislodgement.
-
Operator Safety: Gloves are strictly prohibited during operation to prevent entanglement with pressure rollers.
3. Maintenance Tip
Always verify the cutting length after the first 3-4 bars. If there is a discrepancy, adjust the limit switch or fixed-length plate immediately to maintain Volarmachine’s precision standards.
